Eco-collector
Dual loading
Compartiment de taille autoréglable
Self-adjusting
Weight distribution
Easy unloading
Safety features
De multiples économies
Multiple savings
Technical specifications
Brochure

 


Specifications
A = Truck body width:
2590 mm 102 in.
B = Truck body length:
9652 mm 380 in.
C = Loading zone length:
1727 mm 100 in.
D = Container length:
4724 mm 239 in.
E = Truck body height:
3658 mm 48 in.
F = Container height in dumping position:
5969 mm 26 in.
G = Dimensions of loading buckets:
667 X 667 X 1524 mm
26 1/4 X 26 1/4 X 60 in.
Remark: Dimensions E and F may vary lightly according to the type of frame
 
Floor:
2,7 mm (7/64 in.) 12 gauge steel, increased corrosion resistance
Lateral walls(2):
3,4 mm (9/64 in.) 10 gauge steel, A606
Lateral walls(2):
2,7 mm (7/64 in.) 12 gauge steel, A606
Roof:
2,7 mm (7/64 in.) 12 gauge steel, increased corrosion resistance
Rear door:
2,7 mm (7/64 in.) 12 gauge steel, increased corrosion resistance
Loading buckets:
4,8 mm (3/16 in.) 400 BHN steel
Floor covering:
6,4 mm (1/4 in.) HMW polymer
Approx. inner dimensions of the container:
470 (L) x 249 (W) x 231 (H) cm
185 (L) x 98 (W) x 91 (H) in.
Approx. dimensions of the rear door:
95 (D) x 241 (W) 231 (H) cm
37 (D) x 95 (W) 91 (H) in.
Approximate loading volume:
31 m3 (40,5 yd3)
Rear door opening and locking hydraulically controlled.
 
Loading buckets on both sides of frame, in front of the body.
Loading buckets volume (2):
1,4 m3 (1,8 yd3)
Approx. height of bucket edge/top:
1155 mm (45,5 in.)
Adjustable incline with hydraulic control for transfer of material over the frame rails. In-cab electrical controls.
Semi-automated loading cycle.
Cycle duration:
** 3,5 sec
 
A bulkhead inside the body prevents the intermixing of waste material between the two compartments.
Bulkhead: 12,7 mm (0,5 in.) HMW polymer
The ratio between the two compartments is self-adjustin
 
Hydraulic tank:
227 l 60 US Gal.
Return filter::
10 µm 10 microns
Suction filter:
90 µm 90 microns
Double gear pump:
75 l/min. @ 1200 RPM 20 GPM @ 1200 RPM
Electro-mechanical valve: Compaction force is individually adjustable for each compartment
Compartment A, 6 sections
143 l/min
38 gpm
Compartment B, 5 sections
143 l/min
38 gpm
Double action valve:
Synchronised at 38 l/min 10 gpm
Cylinders:
- Rear door (2):
Ø 76 mm x 699 mm 3 in. x 27,5 in.
- Dumping (1, single action):
Ø 165 mm x 3302 mm 6,5 in. x 130 in.
- Compactors (2):
Ø 101 mm x 1765 mm 4 in. x 69,5 in.
- Buckets (2):
Ø 76 mm x 787 mm 3 in. x 31 in. Đ
- Non-return plates (2):
Ø 76 mm x 798 mm 3 in. x 31,4 in.
- Adjustable incline (1):
Ø 63 mm x 356 mm 2,5 in. x 14 in.
- Extension (1):
Ø 63 mm x 629 mm 2,5 in. x 24,75 in.
- Cart tipper (1):
Ø 63 mm x 368 mm 2,5 in. x 14,5 in.
- Cart tipper (1, actuator):
Capacity of 160 kg 350 lb
 
One (1) year on the co-collector body.
Original equipment manufacturers' warranty on components.
** Under normal operation, stop time required by the operator; the rest of the cycle (13 sec.) takes place automatically and between two doors.

Continuous improvement

In order to continually improve our product, these specifications are information only. Markland retains the right to change without notice certain components of the vehicule for effeciency purposes.
info@markland.ca